Safety Instructions
04.06.2014
Operation Manual
NC: 6110-00125
5
Using the device
Chapter 2: Safety Instructions
The device has left the factory in a faultless condition in regards to safety regulations. To
preserve this condition and to ensure a safe operation, all instructions in this manual must be
observed carefully.
The correct and safe use of this device requires, that operating and service personnel is familiar
with generally valid safety guidelines, complies with them and observes the special safety
comments, listed in this manual. Where necessary, safety sensitive points on the device are
marked.
DANGER
Since the sensor is an electrical equipment, commissioning and service may only be made
by trained personnel. Maintenance may only be carried out by trained, specialized and
experienced personnel.
2.1
Using the device
The linear displacement transducer PR 9350 as well as the set K 20 315 are designed for meas
urement of static and dynamic displacements. The sensor should only be used for measure
ment purposes.
2.2
Radio interference suppression, EMC
The device is carefully shielded and tested to be technically immune to radio interference and
complies with current standards. When operating together with other peripheral devices, that
are not properly shielded against radio interference, disturbances and radio interferences may
occur.
