Operation
MITX-430/MITX-440-DVI-2E Installation and Use Guide (6806800K37B
)
80
LCD Mode
Set LCD Mode as PWM Mode or DC Mode.
Default value is
PWM Mode
.
Table 5-11 USB Configuration
Field
Description
USB Devices
List of the USB devices attached.
Legacy USB Support
Enables Legacy USB support. AUTO option disables legacy support if no
USB devices are connected. DISABLE option keeps USB devices available
only for EFI applications. Default value is
Enabled
.
EHCI Hand-off
This is a workaround for OSs without EHCI hand-off support. The EHCI
ownership change should be claimed by EHCI driver. Default value is
Enabled
.
Device Reset Timeout
USB mass storage device Start Unit command timeout. The options are:
z
10 sec
z
20 sec
z
30 sec
z
40 sec
Default value is
20 sec
.
Controller Timeout
The time out value for control, bulk, and interrupt transfer. The options
are:
z
1sec
z
5 sec
z
10 sec
z
20 sec
z
30 sec
Default value is
20 sec
.
Table 5-10 IGD-LCD Control (continued)
Field
Description
Summary of Contents for MITX-430
