NetSure
™
-48 VDC Power System
User Manual, UM582137200
Spec. No: 582137200
Document Code: UM582137200
Model No: NetSure™ 5100
Revision A, January 11, 2017
[v]
Personal Protective Equipment (PPE)
DANGER!
ARC FLASH AND SHOCK HAZARD.
Appropriate PPE and tools required when working on
this equipment. An appropriate flash protection
boundary analysis should be done determine the
“hazard/risk” category, and to select proper PPE.
This product is intended only for installation in a
Restricted Access Location.
Only authorized and properly trained personnel should
be allowed to install, inspect, operate, or maintain the
equipment.
Do not work on LIVE parts. If required to work or
operate live parts, obtain appropriate Energized Work
Permits as required by the local authority, per NFPA 70E
“Standard for Electrical Safety in the Workplace”.
Hazardous Voltage
DANGER!
Hazard of electrical shock. More than one
disconnect may be required to de-energize the system
before servicing.
Handling Equipment Containing
Static Sensitive Components
ALERT!
Installation or removal of equipment containing
static sensitive components requires careful handling.
Before handling any equipment containing static
sensitive components, read and follow the instructions
contained on the Static Warning Page.
Maintenance and Replacement Procedures
CAUTION! When performing any step in procedures that
requires removal or installation of hardware, use caution
to ensure no hardware is dropped and left inside the
unit; otherwise service interruption or equipment
damage may occur.
NOTE: When performing any step in procedures that
requires removal of existing hardware, retain all hardware
for use in subsequent steps, unless otherwise directed.
Danger
Alert
Caution
Danger
