4
PREPARATION FOR USE
UNPACKING AND SET UP
•
Carefully remove the unit from the carton and remove all packing materials from
the unit.
•
Carefully remove any small strips of tape which may have been used to keep
the CD and Cassette doors closed during shipment.
•
Open the CD compartment by placing you finger under center of the CD door
and lifting upward. Inside the CD compartment you will see a white transit card
which is used to prevent the laser pick-up from moving during shipment. Care-
fully remove this card and close the CD compartment door.
•
Please save the carton and packing materials in the event that your unit ever
needs to be returned for service. The original carton and packing materials are
the only way to protect the unit from damage during shipment.
POWER SOURCES
This unit is designed to operate on 6 pcs “C” batteries, not included, or on normal
120V 60Hz AC house current. Operating this unit from any other power source
may cause damage to the unit, and such damage is not covered by your warranty.
AC Operation
Connect the small end of the AC Power Cord to the AC socket on the back cabinet,
then insert the plug in any convenient household 120V 60Hz AC outlet.
PD5201_D022403.p65
24/2/2003, 15:05
4
