1 3
PROGRAMMED PLAYBACK
You can program up to
20
tracks on a disc to playback in any desired order. You
may also program a specific track to play several times within the same program.
Note:
The player cannot be programmed while a disc is playing. If a disc is playing
press the
STOP
button to stop playback before you begin the programming
steps below.
1.) Move the
FUNCTION
selector to
CD
, insert your disc in the player, close the
door, and wait until the total track number appears in the display.
2.) Press the
PROGRAM
button once. The
PROG
Indicator
and “
00
” begin flashing in the display.
3.) Use the
or
buttons to select the first track to be
programmed. (Example: Track 08).
When track number “08” appears in the display, press
the
PROGRAM
button once again to enter the track
“08” in program memory number “01”.
4.) Track number “08” disappears and “00” flashes again in
the display, indicating that you may now select a track
to be entered in program memory number “02”.
5.) Use the
or
buttons to select the next track to be programmed. When the
desired track number appears in the display press the
PROGRAM
button again
to enter that track in the program memory.
6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
PD6922_B111003.p65
10/11/2003, 11:12
13
