PARTS AND FEATURES
Timer mode
The timer allows the user to program the air conditioner starting time or shutoff time.
Timer ON setting
Plug in the unit; it will go in Standby mode.
Press the "timer" button, then the Timer indicator and number of hours on the screen will flash. Tap or hold the UP arrow
(
▲
) or the DOWN arrow (
▼
) to change starting time, in 0.5 hour increments up to 10 hours, then in 1 hour increments
up to 24 hours.
After 5 seconds, the timer indicator and the display stop flashing. The control will count down the time remaining until
startup. Once timer countdown is finished, the air conditioner will start operating under its previous settings.
To cancel the setting, press the "timer" button again. The timer indicator will switch off.
Timer OFF setting
You can program the air conditioner’s shutoff time with the Timer OFF function.
Press the "timer" button, then the Timer indicator and number of hours on the screen will flash.
Tap or hold the UP arrow (
▲
) or the DOWN arrow (
▼
) to change shut-off time, in 0.5 hour increments up to 10 hours,
then in 1 hour increments up to 24 hours.
After 5 seconds, the Timer indicator and the display stop flashing. The display shows the time remaining until the unit
shuts down.
To cancel the setting, press the "timer" button again. The timer indicator will switch off.
Filter Reset
This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation. The filter indicator
will illuminate after 250 hours of operation. To reset the function after cleaning the filter, hold the "fan speed" button for
5 seconds; the "filter" indicator will go off.
