OPERATING INSTRUCTIONS
º F/°C Display
Press the °F/°C button to switch temperature display between Fahrenheit
and Celsius.
Timer mode
Timer ON setting
Plug the unit into the outlet; the unit will be in Standby mode.
Press the timer button " ", the arrow "
▼
" will "flash above "
".
Now select all desired settings for when the unit will switch on (operating mode,
fan speed and temperature). Confirm all settings by pressing the timer button
" ". The time is displayed and the "h" symbol flashes.
Set the time when you want the unit to switch on using the buttons "
▲
" or
"
▼
"
(from 30 minutes to 24 hours). During the first ten hours, you can select half
hour intervals. For times greater than ten hours, one-hour intervals can be
selected.
Press the timer button" "again to confirm the start-up time. A beep sounds a countdown of the time left on
remote control display. Once the countdown is finished, the unit will start automatically with the settings
previously made.
To cancel the timer programming, press the timer button " " again. The unit emits a beep and display returns to
standby mode.
Timer OFF setting
While the unit is on, in any mode, it is possible to program its shutdown using
the Timer OFF setting.
Press the timer button, the arrow "
▼
" will appear above "
" indicator and "h"
flash. Press"
▲
" or"
▼
" to set the number of hours before the unit shuts off.
Press Timer button again to conform the shutdown time. A beep sounds a
countdown of the time left on remote control display.
Once the countdown is finished, the unit will shut down automatically.
To cancel the timer programming, press the timer button again.
The timer indicator switches off.
