background image

 
 
 
 
 
 
 
 
 
 
The hose can be extended from its original length of 15" up to   
59", but it is the best to keep the length to the minimum   
required.  In  addition,  make  sure  that  the  hose  does  not  have 
any sharp bends or sags. (Fig.7) 
 
 
 
 
 

INSTALLATION INSTRUCTIONS 

Installation of the window slider panel in a double-hung sash window 
1. Cut the foam seals A (adhesive type) to the proper length and attach them to 
the window and sill. (Fig.8) 
2.  Open  the  window  sash  and  place  the  window  slider  kit  on  the  window  sill 
(Fig.9).  Attach  the  window  slider  kit  to  the  window  sill.  Adjust  the  length of  the 
window  slider  kit  according  to  the  window’s  width.  Attach  two  screws  on  the 
window slider kit. See Fig.9.   
Cut the adjustable window slider kit if the window’s width is less than 26.6 inches 
(Fig.10). 
3.Close the window sash securely against the window slider kit. (Fig.11)   
4.Drive  two  ½”  screws  to  secure  the  window  slider  kit  to  the  window  sash.     
(Fig.11) 
5. Secure the window slider kit to the window sill (Fig.11): 
  A: For wooden window sill: use 3/4" screws.   
  B: For vinyl-clad windows: use ½” hex head cap screws. 
6.  To  secure  lower  sash  in  place,  attach  right  angle  sash  lock  with  ½”  (12.7  mm) 
screw as shown (Fig.12). 
NOTE: It is difficult to lock the windows with the sash lock for vinyl-clad windows; 
you can use lock by window itself. 
7. Cut the foam seal B to an appropriate length and seal the open gap between the 
top window sash and outer window sash, as shown in Fig.13. 
 
 

Summary of Contents for QUIET KOOL EAPC10RD1





















Reviews: