background image

• Turn off and unplug the air conditioner before cleaning to avoid the risk of electric shock. 

Do not clean the unit with water. Water can enter the unit and damage the insulation, creating a shock hazard. If water 

enters the unit, unplug it immediately and contact Customer Service. It can cause a risk of electric shock. 

  To avoid possible cuts, avoid contacting the metal parts of the air conditioner when removing or reinstalling the filter. It 

can cause a risk of personal injury. 

  Do not block the air inlet or outlet of the appliance. Reduced airflow will result in poor performance and could damage 

the unit. 

Always grasp the plug when plugging in or unplugging the appliance. Never unplug by pulling on the cord. It can cause a 

risk of electric shock and damage. 

Always turn off and unplug the appliance when it will not be used for extended periods of time. This conserves energy 

and reduces the chance of accidents. 

Install the appliance on a sturdy, level floor capable of supporting up to 110 lbs (50 kg). Installation on a weak or uneven 

floor can result in the risk of property damage and personal injury. 
• Always get the help of a second person to lift or move the air conditioner. 

  Secure the wheels with wheel locks to prevent the air conditioner from rolling on smooth floors. 

Make sure the appliance is the correct size for the area you wish to use the air conditioner. Using an appliance that is the 

wrong size can waste energy and damage the unit. 

Close all doors and windows to the room for most efficient operation. 

  To prevent damage to the surface finish, use only a soft cloth to clean the air conditioner. Do not use wax, thinner, or a 

strong detergent. 

  To prevent spills and property damage, be sure to drain the appliance properly. 

  To prevent the coils from freezing, do not operate the appliance if the room temperature is lower than 41

(5

). 

  Do not position the air conditioner so that pets or house plants are exposed to the direct air flow. It can cause a risk of 

injury to pets or house plants. 

  This air conditioner is designed for normal household use only. 

  Do not drink the water from the drain pan. Dispose of it properly outdoors or down the drain. 

  Do not operate appliance without the filter securely in place. Operation without the filter could damage the unit. 

  Clean the filter every two weeks, or more often if needed. 

 
ELECTRICAL SAFETY 

WARNING - Electric Shock Hazard 

  Failure to follow these instructions can result in death, fire, or electrical shock. 

  This unit must be properly grounded. 

  Do not, under any circumstances, cut or remove the ground prong. 

  If you do not have a properly grounded outlet, or if there is any doubt that the outlet is not properly grounded, a 

qualified electrician should check the outlet and circuit, and, if necessary, install a properly grounded outlet. 

  This air conditioner must be plugged into a grounded 60 Hz, 115 VAC outlet protected by a 13-amp time delay fuse or 

circuit breaker. 

  Do not alter or modify the plug or cord of this air conditioner. If the power cord becomes worn or damaged, the cord 

should only be replaced by a qualified service technician using genuine replacement parts. 

  Do not use with an extension cord. 

 
 

 

 

Summary of Contents for QUIET KOOL EAPC12RD1





















Reviews: