8 – English – CSx
Via
Components
Transmitter Clip-
On Terminal
Battery Shoe
Keypad
Connector
Serial
Number
Label
Operation
Installation
Note: Refer to the CSx Via Mount instruc-
tions for installing the CSx Via onto the
SeeSnake Standard or Mini camera reels.
1. Remove the SeeSnake System Cable
from the reel. Refer to your reel’s Op-
erator’s Manual for instructions on re-
moval.
2. Slide the battery into the CSx Via bat-
tery shoe.
3. Remove the shipping cap from the
CSx Via connector.
4. Align the arrow on the connector with
the unlock symbol on the frame and
insert the CSx Via into the slip-ring
cavity.
5. Turn the CSx Via so that it locks into
place .
NOTICE
Do not touch the contact
pins inside the slip-ring
dial. Stressing the con-
tact pins can cause them
to break.
Removal
To remove the CSx Via, turn it so that the
arrow is aligned with the unlock symbol
and pull straight out.
Summary of Contents for RIDGID SeeSnake CSx Via 66528
Page 12: ...12 English CSx Via ...
Page 37: ...CSx Via Español 37 ...
Page 38: ...38 Español CSx Via ...
Page 39: ...CSx Via Español 39 ...