Instruction Manual
IM-105-4000, Rev 1.3
October 2008
OPM 4000
4-2
Figure 4-1. OPLR Display
Maintenance Mode
- Indicates a maintenance mode switch on the service
module is in a maintenance position and the system is not displaying or
outputting the opacity reading.
Window Dust
- Dirt has accumulated on the transceiver lens and/or the zero
mirror in excess of the > 5% limit and must be cleaned.
Zero Cal Fail
- During calibration check the zero reading has exceeded the
> 2% opacity set point.
Span Cal Fail
- During calibration check the span reading has exceeded the
> 2% opacity set point.
Manual Calibration
- A manual calibration check has been started from the
control unit front panel.
Manual Controls
ACK
- Acknowledges fault alarms and displays the fault message.
DIS
- Changes displayed value each time it is pressed. The display rotates
between opacity %, average opacity, dust/zero shift, and hours to next
calibration.
CAL. AUTO/MAN
- initiates a maintenance cal cycle and resets calibration
cycle timer clock.
(ESC)
EDIT
ENTER
t
EDIT
u
EDIT
REM
LOC
AUTO
MAN
DIS
ACK
+19999
MESSAGE
I
A
D
“Edit Value” Light
“Scroll Menu” Light
Moves Message Cursor
EDIT Keys
Hinged Cover
ALARM
38450009
ZERO
RUN
SPAN
HIGH
OPACITY
OPERATE
CAL.
Summary of Contents for Rosemount Analytical OPM 4000
