RXi2-UP IPC Hardware Reference Manual
Section 6
GFK-3047D
Oct 2021
Hardware Interface
35
6.1.4
Ethernet Ports (Eth1, Eth2, Eth3, Eth4, Eth5)
Five Ethernet interface ports are available on the RXi2-UP IPC. They are located on the front
panel. Ethernet interface requires the use of a CAT 5 cable for proper operation with
100/1000BaseT.
Figure 40: Ethernet Interface Ports (1
–
slot Option)
Table 6-2
Ethernet Interface
10/100BaseT Name
1000BaseT Name
Pin
TxD+
LP_DA+
1
TxD-
LP_DA-
2
RxD+
LP_DB+
3
NC
LP_DC+
4
NC
LP_DC-
5
RxD-
LP_DB-
6
NC
LP_DD+
7
NC
LP_DD-
8
6.1.5
Ethernet LEDs
Two LEDs (green and yellow) are integrated into each of the RJ
–
45 connectors. These LEDs
indicate Ethernet interface link status and activity.
Table 6-3
ETH1 to ETH4 LEDs
Pin
LED Color
LED Status Indication
#GBEx_LINK
Green
Solid = 1000 Mbit
Off = 10/100 Mbit
#GBEx_ACT
Yellow
Solid = No activity, but 10/100/1000 Mbit link
Blinking = Activity ongoing
