Hardware Reference Manual
Mounting
GFK-3022E
September 2021
Mounting
12
3.1.2
Flat Wall Mounting Through Wall
to mount the IPC with screws from the wall side, place drill holes in the wall. Refer to the
following figure for the positions for the holes. The thread in the enclosure is a M6 with a usable
thread length of 15 mm (0.60 in). Select the screw length so that a minimum of 10 mm (0.4 in)
thread will be used and torque to 3.5 Nm (30.98 in lb).
Figure 3-3
Flat Wall Mounting Through Wall