Hardware Reference Manual
Installation and Startup
GFK-3022E
September 2021
Installation and Startup
24
Figure 4-17
Inserted SIM Card
4.
Lock the SIM card into position by moving the upper part in the LOCK
←
direction (as
shown on the part).
Figure 4-18
SIM Card Holder Closed and Locked
4.5.4
M.2 A-Key Add-on Board Installation
ATTENTION
The information described in this section applies to service technicians only.
The M.2 board is connected to the RXi2-XP IPC by inserting the board with a form factor of 2230.