18
2-PORT SINGLE-HEAD SECURE KVM
Section 4 - Operation
Operation
Operating the Product
Self-Test Procedure:
As product powers-up it performs a self-test procedure. In case of
self- test failure for any reason, including jammed buttons, the
product will be Inoperable. Self-test failure will be indicated by the
following abnormal LED behavior:
All
channel-select LEDs will be turned
ON and then OFF;
A specific, predefined LED combination will be turned ON;
The predefined LED combination will indicate the problem
type (jammed buttons, firmware integrity).
Try to power cycle product. If problem persists please contact your
system administrator or technical support.
Now that product, computers and peripherals are connected and
powered up, it is ready for use.
Default Channel
After product boots up, blue LEDs stripe will illuminate and the
default active channel will be channel #1. This will be indicated by
white color illumination of
push-button #1.
Product Mapping to Sources
Product mapping to sources is indicated by stickers/labels specifying
which channel is mapped to which computer.
Front Panel Push-Buttons
Following power up, the default channel is #1.
The user can select any other channel by pressing the appropriate
front panel push button.
The mouse cursor will be positioned at the center of the selected
computer display. If computer is connected to multiple displays, the
cursor will be positioned at the center of the primary display.
The currently selected channel is indicated by white color
illumination of the appropriate push-button.
Once a different channel is selected - keyboard, mouse, and audio
follow selected channel.
Keyboard Status Indication
In order to enhance usability, product provides keyboard status
indications via dedicated LEDs located on product front panel. To
maintain the required unidirectional connectivity between keyboard
and product, these indication are not given on the keyboard itself as
done with non-secure products
The keyboard status indications are given via 3 LEDs on the front
panel of the product:
• CL – CAPS Lock
• SL – SCROLL Lock
• NL – NUM Lock
The indications behave the same as the LEDs on the keyboard as if it
was connected directly to computer.
Switching from channel to channel may change the status of the
LEDs based on the current settings on the computer connected to
the active channel.
