7
2-PORT SINGLE-HEAD SECURE KVM
Section 2 - Overview
c.
When connecting a non-qualified display, the video
diagnostic LED will flash green and video will not
work.
d.
When connecting a non-qualified USB device, fUSB
LED will flash green and USB device will be
inoperable.
8.
Do not connect product to computing devices:
a.
That are TEMPEST computers;
b.
That include telecommunication equipment;
c.
That include frame grabber video cards;
d.
That include special audio processing cards.
9.
Product has a remote control port in the back panel labeled
RCU. Do not use this port - it is inoperable and for future
use.
10.
Important! Before re-allocating computers to channels, it is
mandatory to power cycle product, keeping it powered OFF
for more than 1 minute.
11.
Product log access and administrator configuration options
are described in product Administrator Guide.
12.
Authentication session will be terminated once product
power is down or user intentionally terminates session.
13.
If you are aware of any potential security vulnerability while
installing or operating product, please remove product from
service immediately and contact us in one of the ways listed
in this manual.