45
Reference Manual
00809-0200-4410, Rev BA
Section 5: Host Integration
February 2014
Host Integration
Table 5-3. Setup>EtherNet/IP>EtherNet/IP Communication
Terms
Description
Assembly Object Type
EtherNet/IP use Static assembly object.
EtherNet/IP TCP Port
The TCP Port used to access EtherNet/IP TCP data directly from the
Gateway.
EtherNet/IP UDP Ports
The UDP Ports used to access EtherNet/IP UDP data directly from the
Gateway.
Incorporate value’s
associated status as
error?
If the HART variable status indicates a critical failure or if there is a loss of
communications, it will be reported through the EtherNet/IP member.
Value reported for error
(floating point)
Chooses what value is reported if the value’s associated status indicates a
critical failure. Only used if the Gateway is using float representation
NaN
Not a number is reported if the value’s associated status indicates a critical
failure.
+Inf
Positive infinity is reported if the value’s associated status indicates a
critical failure.
-Inf
Negative infinity is reported if the value’s associated status indicates a
critical failure.
Other
User defined value is reported if the value’s associated status indicates a
critical failure.
Value reported for error
(native integer)
User defined value is reported if the value’s associated status indicates a
critical failure. Only used if the Gateway is using integer representation.
Unmapped parameter
read response
This is the value returned by the Gateway if the EtherNet/IP master
requests a register with no data assigned to it (empty register). It is
recommended this be set to zero fill to prevent errors.
Parameter mapping
Register Mapping is the process of assigning data points from wireless field
devices to EtherNet/IP registers. These registers can then be read by a
EtherNet/IP master or client. EtherNet/IP register mapping can be found
by navigating to
Setup>EtherNet/IP>Mapping
.
