20 Chapter 3 Installation
SmartCabinet Integrated Solution User Manual
M6
h
16 screw
(4 pcs)
Battery module
Bracket
Figure 3-11 Installing battery module
3.3.2 Installing UPS
1. Use six M4 × 10 screws to fix two hangers (accessories) onto both sides of the front panel of the UPS, as shown in
Figure 3-12.
Hanger (2 pcs)
Screw (6 pcs)
UPS
Figure 3-12 Installing brackets
2. Place the UPS on the cabinet bracket (pre-installed), push the UPS in to make the hangers align with the vertical
poles. Use four M6 × 16 screws to fix the UPS on the rack through the hangers, as shown in Figure 3-13.
M6
h
16
screw (4 pcs)
UPS
Bracket
Figure 3-13 Installing UPS
