62 Chapter 6 Web Page Of MSC-C
SmartCabinet Integrated Solution User Manual
Figure 6-19 Sampling signals
If some signal is in alarm status, it will be displayed in red.
Control
Clicking the
Control
tab can enter the control page, which displays control signals of selected device, as shown in
Figure 6-20.
Figure 6-20 Control signals
Select an option from the drop-down box of
Value Setting
, and click the
Set
button to control the device.
Setting
Clicking the
Setting
tab can enter the setting page, which displays setting signals of selected device, as shown in
Figure 6-21.
Figure 6-21 Setting signals
You can set several signals at the same time, and at most 16 signals can be set at the same time for each time.
Note
The TDI device only displays effective setting signals, however, other devices displays all setting signals.
