Chapter 6 Web Page Of MSC-C 71
SmartCabinet Integrated Solution User Manual
Operator
Input 1
Input 2
Param1
Param2
Output
Expression
Note:
1. Sin1, Rin1, Sin2, Rin2, P1, P2, Sout, Rout respectively refer to Signal 1, Input1 Register, Signal 2, Input2 Register, Parameter
1, Parameter 2, Signal 3, Output Register;
2. The input signal of logic operator AND/OR/NOT/XOR/DS can only be alarm signal;
3. The input signal value of arithmetic operator GT/LT can only be float, int or long int;
4. All output signals can only be control signals, and the output signal value must be enumerated type
The alarm linkage information has already been configured before delivery of SmartCabinet, as shown in Figure 6-40:
6.4.4 Data & History
The
Data & History
menu supplies query service of all types of historical data and logs for the user.
On the MSC-C homepage, click
Data & History
in the left part, three submenus appear, including:
Device
Information
,
History Data
and
History Log
.
Device Information
Click the
Device Information
submenu under the
Data & History
menu, the page shown in Figure 5-41 pops up.
The page includes two tabs:
Device Information List
and
Export SNMP MIB
.
1. Device Information List
As shown in Figure 6-36, the page lists the main information of all equipment. Click the
Download
button to
download the query result.
Figure 6-36 Device information list
2. Export SNMP MIB
As shown in Figure 6-37, you can select
Export All Device MIB
or
Export MIB By Device
. After selection, click the
Download
button to export MIB information.
Figure 6-37 Export SNMP MIB
Note
If you do not get the SNMP service authorization, the
Export SNMP MIB
page will not appear. If you need to get the SNMP
service license, please contact Emerson customer service center for purchase, and the contact number is 4008876510.
