background image

3

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

 • Reorient or relocate the receiving antenna.

 • Increase the separation between the equipment and receiver.

 • Connect the equipment into an outlet on a circuit different from that to which the

  receiver is connected.

 • Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

(1)  This device may not cause harmful interference, and

(2)  This device must accept any interference received, including interference

that may cause undesired operation.

 

• Avoid installing this unit in places exposed

to direct sunlight or close to heat radiating

appliance such as electric heaters, on top

of other stereo equipment that radiates

too much heat, places lacking ventilation

or dusty areas, places subject to constant

vibration and/or humid or moist areas.

 • Store your CDs in a cool area to avoid

damage from heat.

IMPORTANT NOTES

 • Do  not  attempt  to clean this  unit with

chemical solvents as this might damage

the finish. Use a clean dry cloth.

 • Operate  controls  and  switches  as

described in the manual.

 • Before turning on the power, make certain

that the connecting  cords,  if any, and

power cord are properly installed.

 • When moving the set, be sure to first

disconnect the AC power cord.

CLASS 1 LASER PRODUCT

CLASS 1 LASER PRODUCT

APPAREIL Á  LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN AND INTERLOCKS

DEFEATED.

AVOID EXPOSURE TO BEAM

This product contains a low power Laser Device.

SB220_011305.p65

13/1/2005, 10:27

3

Summary of Contents for SpongeBob Squarepants SB220

















Reviews: