background image

1.

Restore electrical power to the outlet box by turning
the electricity on at the main fuse box.

2.

Check the operation of the fan by gently pulling on
the pull chain switch.

3.

All fans are shipped from the factory with the
reversing switch positioned to circulate air
downward. If airflow is desired in opposite direction,
turn your fan off and wait for the blades to stop
turning, then slide the reversing switch to opposite
position, and turn fan on again. The fan blades will
turn the opposite direction and reverse the airflow.

Your fan model is equipped with a 4-position, 3-speed
pull chain switch. The operating sequence is as
follows:

Using Your Ceiling Fan

SPEED
CONTROL
SWITCH

REVERSIBLE
SWITCH

THREE-SPEED

1st Pull — High
2nd Pull — Medium
3rd Pull — Low
4th Pull — Off

To reduce the risk of fire or electrical shock, do not
use this fan with any solid-state speed control
device.

WARNING

!

8

IMPORTANT CARE INSTRUCTIONS 

for your Ceiling Fan

Periodic cleaning of your new ceiling fan is the only
maintenance that is needed.

When cleaning, use only a soft brush or lint free cloth
to avoid scratching the finish.

Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish.

Maintenance

Accessories

1.

Ceiling Fan Light Kits (see store or catalog).

2.

Ceiling Fan/Light Controls (see store or catalog).

3.

Downrod Extension Kits (see store or catalog).

Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of an electrical shock.

WARNING

!

This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product by
Emerson Electric Co. Substitution of parts or
accessories not designated for use with this product
by Emerson Electric Co. could result in personal
injury or property damage.

The use of any other control not specifically
approved for this fan could result in fire, shock and
personal injury.

WARNING

!

WARNING

!

To reduce the risk of fire or electrical shock, do not
use this fan with any solid-state speed control
device.

WARNING

!

U.L. Model No.: CF742PF

Summary of Contents for SUMMER NIGHT CF742PFORB01














Reviews: