1 1
OPERATION
1.) Make sure that the HOLD button is in the ‘Off’ position. (The HOLD
indicator does not appear in the display.)
2.) Press the POWER button to turn the radio
‘On’. An AM, FM, TV or Weather Band
frequency will appear in the display.
3.) If necessary press the BAND button to switch
between AM, FM, TV and Weather bands.
The appropriate band indicator appears in the
display to confirm your selection.
4.) Press the TUNING “ + ” or TUNING “ – ” buttons to select the desired station
as follows:
•
Manual Tuning
Repeatedly press the TUNING “ + ” or TUNING “ – ” buttons until the display
shows the frequency of the desired radio station.
The desired TV channel (“ 2 ch ” through “ 13 ch ”), or
The desired Weather Band channel (“ 1 ch ” through “ 7 ch ”).
•
Automatic Tuning
Depress and hold either the TUNING “ + ” or TUNING “ – ” button until the
display begins to move then release the button. The tuner will search up or
down until it finds the next strong station and stops on that station. Repeat this
procedure until it stops on your desired station.
5.) Adjust the VOLUME and BASS BOOST controls as desired.
6.) When you are finished listening press the POWER button to turn the power
‘Off’. The display will return to the correct time of day.
FM
PRESET
PRESET
WB
HR2003_ib040903.p65
9/4/2003, 11:12
11
