28
Operation
B. Safety Setpoints
A detailed explanation of all safety setpoints can be found
in the Compact Logix PLC manual, p/n 35391CL.
1. Oil Pressure
Low oil pressure differential stops the compressor unit
when there is an insufficient difference in pressure
between the oil manifold and suction.
2. Discharge Pressure
High discharge pressure cutout stops the compressor
unit, when the discharge pressure in the oil separator
exceeds the setpoint.
3. Suction Pressure
Low suction pressure cutout stops the compressor
unit when the suction pressure drops below the
setpoint.
4. Oil Filter Differential
High oil filter differential cutout stops the compres-
sor unit when the difference between the outlet and
inlet of the filter exceeds the setpoint.
5. Oil Temperature
The oil temperature cutout stops the compressor
unit when the oil temperature is too high or too low.
6. Discharge Temperature
The high discharge temperature cutout stops the
compressor unit when the discharge temperature
exceeds the setpoint.
COMMAND SHAFT ROTATION
NO. OF TURNS / ROTATION ANGLE / SLIDE TRAVEL
COMP. CAPACITY VOLUME CAPACITY
VOLUME
MODEL
INC DEC INC DEC
TURNS/DEGREES/TRAVEL TURNS/DEGREES/TRAVEL
VSSG 291 CW CCW CW CCW 0.91 / 328 / 3.568” 0.52 / 187 / 2.045”
VSSG 341 CW CCW CW CCW 0.91 / 328 / 3.568” 0.52 / 187 / 2.045”
VSSG 451 CW CCW CW CCW 0.91 / 328 / 3.568” 0.52 / 187 / 2.045”
VSSG 601 CW CCW CW CCW 0.91 / 328 / 3.568” 0.52 / 187 / 2.045”
VSG 751 CCW CW
CCW CW 1.09 / 392 / 4.283” 0.63 / 227 / 2.473”
VSG 901 CCW CW
CCW CW 1.09 / 392 / 4.283” 0.63 / 227 / 2.473”
VSG 1051 CCW CW
CCW CW 1.22 / 439 / 4.777” 0.74 / 266 / 2.889”
VSG 1201 CCW CW
CCW CW 1.22 / 439 / 4.777” 0.74 / 266 / 2.889”
VSG 1551 CCW CW
CCW CW 1.36 / 490 / 5.325” 0.82 / 295 / 3.200”
VSG 1851 CCW CW
CCW CW 1.36 / 490 / 5.325” 0.82 / 295 / 3.200”
VSG 2101 CCW CW
CCW CW 1.36 / 490 / 5.325” 0.82 / 295 / 3.200”
VSG 301 CW CCW CW CCW 0.80 / 288 / 3.141” 0.45 / 162 / 1.767”
VSG 361 CW CCW CW CCW 0.80 / 288 / 3.141” 0.45 / 162 / 1.767”
VSG 401 CW CCW CW CCW 0.80 / 288 / 3.141” 0.45 / 162 / 1.767”
VSG 501 CCW CW
CCW CW 0.91 / 328 / 3.568” 0.52 / 187 / 2.045”
VSG 601 CCW CW
CCW CW 0.91 / 328 / 3.568” 0.52 / 187 / 2.045”
VSG 701 CCW CW
CCW CW 0.91 / 328 / 3.568” 0.52 / 187 / 2.045
”
NOTE: These refer to the old style gear motors and DO NOT apply to the new optical motors. Rotation for the
optical motors is the OPPOSITE of what is shown in the chart.
Table 1
Summary of Contents for VSG
