5
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF530
FLOOR
CEILING
AT LEAST
7'
Figure 1
The fan must be hung with at least 7' of clearance from
floor to blades (Figure 1).
WARNING
!
The outlet box and joist must be securely mounted and
capable of supporting at least 50 lbs. Use only a U.L.
outlet box listed as “Acceptable for Fan Support of
22.7 kg. (50 lbs.) or less”.
WARNING
!
To reduce the risk of fire, electric shock, or personal
injury, mount fan to outlet box marked “Acceptable for
Fan Support of 22.7 kg. (50 lbs.) or less”, and use
screws supplied with outlet box. Most outlet boxes
commonly used for support of light fixtures are not
acceptable for fan support and may need to be
replaced. Consult a qualified electrician if in doubt.
WARNING
!
Turning off wall switch is not sufficient. To avoid
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and
the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
WARNING
!
3.1
Disconnect electrical power to the branch circuit at the
circuit breaker or fuse box before attempting to install
the ceiling fan mounting plate on the outlet box.
CEILING MOUNTING PLATE HOOK
OUTLET BOX
CEILING
MOUNTING
PLATE
OUTLET BOX SCREWS (2)
Figure 2
3. How to Hang Your Ceiling Fan
3.2
Pull the electrical supply black, blue, white and ground
wires through the center opening of the ceiling
mounting plate before securing the plate to the outlet
box (Figure 2).
Position the ceiling mounting plate onto the outlet box
and secure using the two outlet box screws, supplied
with outlet box (Figure 2).
BP7484 Wyatt CF530 12/18/13 11:52 AM Page 5
