- 4 -
v. 3.20
Emery Thompson CB-350 Countertop Batch Freezer
machine has left the factory of the Company, nor for any defect that may arise
by placing any part in said machine which has not been manufactured or
approved by the Company. Misuse of the machine includes owner’s failure to:
(1) clean, lubricate and assemble per the Operator’s Manual; (2) replace
damaged or worn “wear items”, including but not limited to o-rings, gaskets,
front bearing, rear bearing, scraper blades, drive shaft, water valve. (3) handle
parts properly, resulting in breakage; or (4) use unauthorized service
agencies.
Purchaser shall not remove, alter or deface the serial number on said
machine and there shall be no liability of Emery Thompson Machine and
Supply Company if any of same shall occur.
Repair or Replacement of Defective Parts.
The Company’s obligation
under this warranty is limited to the repair of defective parts at the Brooksville,
Florida plant or replacement from the Company’s own inventory. In the event
the Company ships a replacement part prior to the return of the defective part,
payment will be required for said part and credit issued or reimbursement
made
only if the defective part is returned within thirty (30) days from
replacement date.
WARNING: The use of alternate refrigerants will void your warranty. Use
only the refrigerant specified on this unit’s data plate (located on rear
panel of machine).
Emery Thompson Machine and Supply Company, Inc. reserves the right
to make design changes, or to make additions to, or improvements on its
products without imposing any obligation on itself to make such changes on
its products previously manufactured.
THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER
WARRANTIES AND REMEDIES UNDER THE LAW, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. THE ORIGINAL OWNER’S SOLE REMEDY
WITH RESPECT TO ANY EMERY THOMPSON FREEZER SHALL BE
REPAIR OR REPLACEMENT OF DEFECTIVE COMPONENTS UNDER THE
TERMS OF THIS WARRANTY.
