15
Ɣ
Input low limit value (ex. 100g), the way is as same as high limit was set.
Ɣ
After inputting low limit value, press “
TARE/Enter”
key to confirm it. Then the scale will
return to weighing mode with the Check-weighing function enabled
When a weight is placed on the scale the arrows will show if the weight is above or below the
limits and the beeper will sound as described below.
BOTH LIMITS SET
The display will show “
OK”
and the beeper will sound when the weight is between the limits.
LOW LIMIT SET
Ɣ
HIGH LIMIT is set to zero
Ɣ
The display will show “
OK”
and the beeper will sound when the weight is less than the
Low Limit.
Ɣ
Above the Low Limit the display will show
“HI”
and the beeper will be off.
859715-25-35 en ma 2012-07
