98 118 US 3.4 - 12 2010
6 / 20
www.santos.fr
ELECTRICAL CONNECTION
x
The electric power supply for the machine is available in 2 single-phase voltages:
1. 110-120 V 50/60 Hz: Model 18V1
2. 220-240 V 50/60 Hz: Model 18
Line protection
: the machine should be connected to a standard 2-pole + earth electric
socket. The system should be fitted with an RCD and a fuse rated at 16A.
The appliance
must be earthed
(fig. B).
CARE:
x
Before connecting the machine, check that the mains electrical voltage is the same
as the voltage for your appliance. Its value is shown:
¾
either on the identification plate (
11
) under the machine.
¾
or on the identification plate on the last page of this manual.
x
If the power cable (
10
) is damaged, it should be replaced by a special assembly
available from approved SANTOS dealers or from SANTOS.
COMMISSIONING
Carefully clean the parts entering into contact with the foodstuffs (fig. B).
x
Clean the protective cover (
1
), the bowl (
3
) and the mixing fork (
7
) using a non-
abrasive sponge and a standard washing liquid.
RECYCLING THE PRODUCT AT THE END OF ITS SERVICE LIFE
This equipment is marked with the selective sorting symbol relating to
wastes from electrical and electronic equipment. It signifies that this product
should be taken over by a selective collection system conforming to the
Guideline 2002/96/EC (WEEE) – part Professional Equipment – so that it
can be either recycled or dismantled in order to reduce any impact on the
environment.
For more information, please contact your Retailer or the SANTOS.
For eliminating or recycling components of equipment, please contact a specialized
company or contact SANTOS.
The electronic products not undergoing a selective sorting are potentially dangerous for
the environment.
The damaging materials should be eliminated or recycled according to the regulations in
force.
!
408015 en ma 2010.12
6/20
