7
Control Panel Operation
Before riding your scooter, please make sure you have a full understanding of all the
functions and how to operate the controls correctly.
Key Switch:
Turn the key clockwise to operate the scooter. OFF is anti-clockwise.
LH/RH Direction Indicator Button
Press the left or right button to indicate the scooters
turning direction. Press again to switch off the indicator.
Horn/Buzzer:
Pressing this button activates the horn.
Caution Alert:
Activates front and rear hazard lights.
Front Light:
Press to turn on the front LED headlight.
Battery Volume Meter:
Indicates the remaining battery level. If the meter goes into the
Red area, please charge the scooter as soon as possible to protect the battery and scooter.
Speed Adjustment Knob:
Adjusts the Minimum and Maximum scooter speed. Fig Turtle
indicates low speed while the Rabbit indicates high speed.
Power-On Indicator/Malfunction Indicator:
When the key is turned on this indicator
light will be stable, if there is any malfunction this indicator will blink repeatedly. The
number of times the light blinks indicates the fault. SEE FAULT CODES on page 9.
Throttle Lever:
the throttle lever is used to control the forward and reverse direction,
speed and acceleration of the scooter. Pull the right side to go forward and the left side to
reverse. The speed will increase in proportion to the distance the bar is pulled.
The auto braking system works automatically when the hands are released from the
throttle lever. The scooter will slow down and stop automatically then the brake will
activate.
Keep speed as low as possible when starting
