6
Seat
1)
Depth: The seat is equipped with slider, as shown in the Fig above. Pulling up the
slider bar allows the seat to move forward or back to adjust the distance from the
tiller or to provide more leg room.
2)
Rotating: Hold the Seat Rotation Lever, then turn the seat around to your required
position, release the Seat Rotation Lever to lock the seat.
3)
Reclining: Pull up the Recliner Handle and adjust the Seat Backrest to the required
angle and release the Recliner Handle to lock the backrest.
4)
Armrest Width Adjustment: At the rear of the seat, there are two bolts each side on
the Armrest Fixing Pipe. Loosen these bolts and pull the Armrest Pipe out to the
required position and tighten the bolts back to lock the armrest.
5)
Headrest Height Adjustment Release the Headrest Locking Pin and Pull Up or
Press Down the Headrest and then release the Locking Pin to lock the headrest.
