Blanking off
Fascia discharge slot(s) need blanking off when ducts are
used to channel conditioned air to other areas.
• Position two polystyrene blanking off strips (provided)
in fascia discharge slots to direct air to ducts.
• Up to two non-adjacent sides may be blanked off.
If fascia discharge slot needs blanking off —
1.
Remove inlet grilles and fi lters. See Figure 4 and
Figure 2, Page 9 .
2.
Turn fascia over to expose polystyrene insulation. See
Figure 3 .
3.
Push one polystyrene blanking-off pieces into recess in
polystyrene fascia insulation.
MOUNTING THE UNIT
Figure 2 - Model 18 - 24 — Two Hinged Grilles
And Two Filters
Hinge
H
Hi
H
Figure 3 - Applying Blanking-Off Pieces
Blanking-Off
Pieces
Figure 4 Models 9–12 — One Grille & One Filter
9