49
|
ENGLISH
3.
Select ‘Transmission’ and press the ‘OK’ button. Set ‘Transmission’ to ‘On’ and
write down the URL displayed on the screen.
4.
press the ‘OK’ button after which the ‘Network’ menu is shown again.
5.
If you don’t have the URL anymore mentioned in step 3 please request the media
player’s IP-Address. Select ‘Setup-Misc-Network Info’ and press the ‘OK’ button
after which the (detailed) network information is shown (write down the IP
address).
6.
Open your computer’s web browser.
7.
Fill out the IP-address of the EM7480/EM7485 using the web browsers address
bar followed by :9091 and press the ‘Enter’ button.
For example: http://192.168.8.25:9091
8.
Click ‘Open’.
9.
Then click ‘Browse’ and browse to your torrent file.
10. Double-click the torrent file you want to use.
11. Click ‘Upload’ after which the torrent file will be transferred from your computer to
the media player.
12. The download will start automatically. If not, select the torrent which will be
displayed in the menu and click ‘Start’.
Down at the left of the menu, you will see a sprocket. Click this sprocket to go the
settings page of Transmission. Here you can alter settings like your maximum
download speed. There is no limit to this download speed by default, so your network
and internet connection may experience a poor performance. For this reason we
recommend you to set a maximum to this download speed.
Although Transmission has UPnP support, it is possible you have to open the
Transmission port manually on your modem or router in case your modem or router
does not support UPnP functions. The used port can be found at the settings page of
Transmission and can also be changed. Refer to the manual of your modem or router
how to open ports if necessary.
15.0 MISC menu
Version Info:
Using this function, you will be able to retrieve the current firmware version. This can
be useful since firmware upgrades can become available. Before upgrading, you need
to know which firmware is already installed.
1.
Use the navigation keys to select ‘Setup’ and press the ‘OK’ button.
2.
Select ‘Misc’.
3.
Select ‘Version Info’ and press the ‘OK’ button after which the firmware version
information will be shown amongst others.
