17
Memory Functions (Satellite)
There are four different user memory types in the Combolook Color
HD
instrument.
They are divided according to the type of data storage required. Each memory area is
chosen automatically depending on the type of data.
Spectrum Memory: There are 100 memory positions reserved for User data of the
spectrum waveforms. This data can be loaded and viewed or mixed with the current
signal for comparison.
Analog memory: There are 100 memory positions reserved for User data of Analog
frequencies. Each position stores the Name, frequency, 13/18V, and 22kHz state.
Digital Memory: There are 100 memory positions reserved for User data of Digital
frequencies. Each position stores the Name, frequency, 13/18V, and 22kHz state.
Digital Channel Memory: There are 100 memory positions reserved for User data of
Digital Channels. Each position stores the Name, Service ID, frequency, 13/18V, and
22kHz.
Text Editor (Satellite)
All the User memory areas use the Text Editor for saving the name for the memory
position. With the Digital Channel memory, the current channel name is entered from
the SDT data and usually this name is correct and all that is required is to save the name.
With the other memory positions, a name requires manual entry. Use the knob to select
the characters from the list and the knob select button to enter the character. Characters
can be deleted by using the keypad ‘1 Delete’ and the current position can be changed
by the keypad ‘2 Left’ or ‘3 Right’. The keypad ‘* Save’ completes the entry and saves the
name to the memory position.