19
Setup (Satellite)
The Setup menu contains the functions which are used
infrequently.
LNBLO
LNBLO
LNBLO
LNBLO)
)
)
) The LNB type can be selected in this menu. The LNB local
oscillator down converts the satellite frequency (10670MHz to
12750MHz) to the intermediate frequency ( 920MHz to
2150MHz). If no conversion is desired, the IF setting is used.
Analog
Analog
Analog
Analog)
)
)
) The default for the Analog Picture inversion can be set
here. Normal is used by Ku Band and Invert is used for C Band.
Motor
Motor
Motor
Motor)
)
)
) The positioner type can be set here. The most common
positioner type is DiSEqC (Dis 1.2) and the other types supported
are Satsel and Satscan.
Display
Display
Display
Display)
)
)
) The display units for signal level can be set to dBuV, dBm, or dBmV.
The LCD contrast can be adjusted and the LCD backlight enabled or disabled. The
Spectrum Graticule can be turned on for dB guidelines.
AutoOff
AutoOff
AutoOff
AutoOff)
)
)
) AutoOff can be set to turn the unit off automatically after a number of minutes
if no knob of key actions occur. AutoOff does not operate when on external power.
KeyCl
KeyCl
KeyCl
KeyClick
ick
ick
ick)
)
)
) The beep for a keypress can be enabled or disabled.
Knob Dir)
Knob Dir)
Knob Dir)
Knob Dir) The direction of movement for the knob can be changed for frequency
adjustments and for other functions such as selecting the displayed picture. The default
is clockwise rotation of the knob is increasing frequency and moves the onscreen
selection down.
TV/SAT)
TV/SAT)
TV/SAT)
TV/SAT) The instrument mode when turned on can be selected to start either in TV mode
or Satellite mode. A third option is available which will ask the user on startup to select
the mode. If no selection is made within 20 seconds, the instrument will turn off.
Version
Version
Version
Version)
)
)
) The version menu displays serial number, levels of the firmware and related
information.