7
RF Input from LNB)
RF Input from LNB)
RF Input from LNB)
RF Input from LNB) This is the LNB input. It supplies 13V/18V and the 22kHz signal
when required.
Audio Volume)
Audio Volume)
Audio Volume)
Audio Volume) The audio volume can be adjusted for either the Digital or Analog
reception.
Audio Tuning)
Audio Tuning)
Audio Tuning)
Audio Tuning) This can tune the Audio passband from 5.5 MHz to 8.5 MHz for Analog TV
reception.
Tuning Knob)
Tuning Knob)
Tuning Knob)
Tuning Knob) This knob is used for frequency selection and other functions. The knob
includes a push button that is used for selection. In the Spectrum mode, the tuning knob
is used for frequency adjustments, bandwidth (span) adjustments and signal Offset level.
The knob button is used to change the mode. In the Digital Picture mode, the knob is
used to select the next picture, and for memory selections. In the Analog Picture mode,
the knob is used for frequency selection and for memory locations. In the Digital mode,
the knob is used for frequency selection and memory selection.
RS232)
RS232)
RS232)
RS232) This port is used for firmware updates and updates of channel information.
Video and Audio Output)
Video and Audio Output)
Video and Audio Output)
Video and Audio Output) The video and audio signal can be output to another device for
viewing.