Content:
DIGIAIR PRO CATV – Description
2
1 GETTING STARTED
3
1.1 POWER ON/OFF
3
1.2 POWER SUPPLY AND BATTERY
3
1.3 HOW TO USE THE METER
3
2 DESCRIPTION OF THE FUNCTIONS
5
2.1 SINGLE CHANNEL MODE
5
2.2 DIGITAL-MODE
5
2.3 MULTI CHANNEL MODE
5
2.4 SPECTRUM MODE
6
3 MENU
6
3.1 Symbol Rate.
6
3.2
QAM Mode.
6
3.3 SETUP
6
TECHNICAL SPECIFICATION
8
DIGIAIR PRO
CATV
– DESCRIPTION
Emitor´s DIGIAIR Pro CATV is developed in Sweden for cable-tv measurement's.
This is made for both analog and digital cable tv.
DIGIAIR Pro CATV is microprocessor controlled, making it very reliable and accurate.
Signalstrength is presented on the LCD-display. In analog mode it shows a single channel or six
channels at the same time. You can also choose to view the signal in spectrum mode.
In digital mode it displays the BER (bit error rate) and MER (modulation error ratio). Readout of
UCB (uncorrected bits) and CB (corrected blocks) is also easy to do.
DIGIAIR Pro CATV is very sensitive and can detect even the weakest signals.
DIGIAIR Pro CATV is charged via an external DC power-source of 10 -15 volt.
The DIGIAIR PRO
CATV
operates with 8xAA rechargeable batteries. The unit will works for at
least 2 hours with fully charged batteries.
2
