Emjoi MICRO-PEDI PRO TORNADO, Instruction Manual

P. 8

CLEANING

15

13

16

18

17

Before  cleaning  the  Emjoi®  Micro-Pedi  Pro 

Tornado  the  roller  must  be  removed.  The 

Micro-Pedi  Pro  Tornado  rollers  should  not 

placed into water.

The 

Emjoi®  Micro-Pedi  Pro  Tornado

  is  not 

waterproof.  The  head  is  water  resistant.  The 

Micro-Pedi rollers should never be placed into water 

or disinfectant and should always remain dry.

1.  Make sure to turn off your unit and if you 

have it plugged in, unplug it from the 

electrical outlets.

2.  Remove the Micro-Pedi Pro Tornado roller 

(fig. 13). (see changing the Micro-Pedi Pro 

Tornado Roller section)

3.  Remove the head from the unit (fig. 14).
4.  Rinse the head (with no roller attached) under 

running water for 5-8 seconds (fig. 15).

  Note: Be sure to remove the head from the 

base  of  the  unit.  The  head  is  water 

resistant.  The  base  cannot  be  rinsed  or 

immersed in water.

5.  Wipe the head with a clean dry cloth.
6.  Place head onto base of the unit (fig. 16).
7.  Insert the Micro-Pedi Pro Tornado roller 

(fig. 17). (see changing the Micro-Pedi Pro 

Tornado Roller section)

8.  Replace the protective cover (fig. 18).

14