36
=
=
i
When count value reaches the Set Value, Output Position is changed. If
Output Pulse time is not 0, then Output Position is changed
at the end of the Pulse time and counting value becomes 0 and output
becomes inactive position. If output pulse time ,then
output position has not change until Manual Reset happens.
When counting value reach Set value, output position becomes active
position. If the Start input is active, then counting continue over the Set
value.
When Manual Reset happens, count value becomes 0 value.
Counting direction : 0 --> P (Upcounting)
=
Automatic Reset-4
=
0
Set
Reset
Output
0
Set
Start
Output
Reset
Start
If output functions parameter is selected Automatic Reset (
, or , then must be different from zero
for realizing Automatic Reset.
