37
=
i
=
Counting direction : P --> 0 (Downcounting)
=
When count value reaches the 0 Value, Output Position is changed. If
Output Pulse time is not 0, then Output Position is changed
at the end of the Pulse time and counting value becomes Set value and
output becomes inactive position. If output pulse time
, then output position has not change
until
Manual Reset happens.
When counting value reach 0 value, output position becomes active
position. If the Start input is active, then counting continue under the 0
value.
When Manual Reset happens count value becomes SET value.
=
Output
0
Output
0
Set
Reset
Start
Set
Start
Reset
If output functions parameter is selected Automatic Reset (
, or , then must be different from zero
for realizing Automatic Reset.
