CDSA User Manual
CDSA Disc Player
The CDSA is a disc player for CD and stereo SA-CD. While it does play the mulichannel
program of SA-CD discs it only provides 2 channels of analog output. As a unique
feature, the CDSA up-samples any PCM signal to twice the sample rate as it is used on
SA-CD’s before converting it to the analog output.
Features
•
Supported disc formats:
•
Redbook
CD
•
Stereo
SA-CD
•
MP3
•
Digital output: AES/EBU
•
Analog
outputs:
•
Impedances:
100
Ω
balanced (XLR), 50
Ω
unbalanced (RCA)
•
2 user selectable levels:
Low position:
XLR outputs:
4V (+14.38dBu)
RCA outputs: 2V (+8.353dBu)
High position:
XLR outputs:
7.2V (+19.38dBu)
RCA outputs: 3.6V (+13.34dBu)
Note: XLR outputs are balanced with pin 2 hot (+), pin 3 cold (-) and pin 1 ground.
•
Proprietary MDAT technology for upsampling CD playback to 5.6MHz
•
Proprietary Dual Differential DAC Circuit (
not
based on any standard off-the-shelf
available DAC chip).
•
Exclusive Composite Laminate Circuit Boards
•
System control via Infrared remote and serial RS-232
•
USB port for future software upgrades (see Appendix B)
•
Power
supply
•
Power
factor
corrected
•
Factory set to 100V or 115V or 230V, 50/60Hz
•
Power consumption: max. 60W
•
Dimensions W x D x H: 435 x 400 x 140mm
•
Weight:
12kg
3
