CDSA User Manual
Status info from CDSA
The CDSA sends back 10 Bytes terminated with a <CR> whenever any status changes.
Byte 0
Byte 1
Byte 9
<CR>
Byte 0
Seconds ones in ASCII
Byte 1
Seconds tens in ASCII
Byte 2
Minutes ones in ASCII
Byte 3
Minutes tens in ASCII
Byte 4
Hours ones in ASCII
Byte 5
Track number ones in ASCII
Byte 6
Track number tens in ASCII
Byte 7
bit 0
1 when “Reading” indicator is on (front panel)
bit 1
1 when “Repeat Track” indicator is on( front panel)
bit 2
1 when “Repeat All” indicator is on (front panel)
bit 3
1 when “CD PCM 2HC” indicator is on (front panel)
bit 4
1 when “SACD 2CH” indicator is on (front panel)
bit
5
reserved
bit
6
reserved
bit 7
1 when DVD disc is selected (DVD-V or DVD-A)
Byte 8
bit 0
reserved
bit 1
1 when front panel display is off
bit 2
1 when CDSA in Standby mode
bit 3
1 when “No Disc” indicator is on (front panel)
bit
4
reserved
bit
5
reserved
bit 6
1 when in pause
bit 7
1 when audio phase inverted
Byte 9
<CR> (x0D)
8
