013
Operation
Menu Details
Use the up/down arrow keys to select one of the 5 features from the pop-up menu.
Press the “ENTER” button to select. Feature details:
1. CONTRAST & BRIGHTNESS
Use the CONTRAST & BRIGHTNESS feature to change the display brightness
and contrast settings. Starting with the brightness setting, use the left and right
arrow buttons to adjust the level of brightness then press the “SAVE” button to
save the brightness setting. Press the “NEXT” button to access the CONTRAST
control. The process to set and save the contrast setting is the same as setting
the brightness. Press the “EXIT” button to exit the CONTRAST &
BRIGHTNESS controls.
2. ASSIGN INPUT 1 & ASSIGN INPUT 2
Using the ASSIGN INPUT 1 & ASSIGN INPUT 2 feature, you can directly
assign up to two DA2 V2 inputs to the front panel buttons rather than using
the back (
◄
) and forward (
►
) scroll/toggle buttons. First select either ASSIGN
INPUT 1 or ASSIGN INPUT 2 from the main pop-up menu. Once selected you
will be given a list of available inputs to assign to the button. Select an input
from the list by using the up (
) and down (
) scroll button. Save the input
selection to the button by pressing the “SAVE” button. You can assign one or
both inputs. If you just assign one input to a button, the other button can still be
used to scroll through the DA2’s inputs. Press the “EXIT” button to exit the
ASSIGN INPUT controls.
EXIT
SAVE
Assign
INPUT 1
EMM
USB
AES
COAX
PDAI
TOS1
TOS2
►
© 2015-2020 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DA2 V2 AUDIO CONVERTER OWNER’S MANUAL
EXIT ◄ NEXT ► SAVE
Adjust
BRIGHTNESS
