EMMLabs DA2 V2 Owner'S Manual Download

Page: 17 / 20

017

Operation

Basic Operations and Input Connections

DA2 V2 USB Audio:

1. First, use only an appropriate well-sheilded certified USB 2.0* cable to connect from

any USB digital audio source component’s (computer, laptop, media player etc.)

output to the DA2 V2’s

USB Audio

input (

NOT the USB service port

2. The DA2 V2’s USB Audio interface uses the B-type USB connector similar to

connectors used on printers. Please see image below:

3. Select the USB Audio input using the input selector buttons or remote.

4. For MAC OSX systems, no driver is needed. OSX has the appropriate USB driver

already installed.

5. For Windows systems install the provided USB audio driver or download from the

product specific section of our website https://www.emmlabs.com located in the

Please read and carefully follow the driver installation instructions.

6. Kernel, ASIO and WASAPI drivers will be installed.

For Windows Media Player playback; in Windows Control Panel set the default sound

playback to the listed USB Audio device as per the installation instructions.

*Not using proper USB cables will cause audio issues between digital source and DAC.

DA2 V2 AUDIO CONVERTER OWNER’S MANUAL

Summary of Contents for DA2 V2




















Search results

Summary of Contents for DA2 V2

Reviews:

Related manuals for DA2 V2

Brands by name

Popular brands

EMMLabs DA2 V2, Owner'S Manual

Search results

Summary of Contents for DA2 V2

Reviews:

Related manuals for DA2 V2

Brands by name

Popular brands