020
Infrared Remote Control
Toggles the preset display brightness settings in DA2 V2.
These buttons are used to select the digital source input:
• EMM : Selects the EMM Optilink input.
• PC : Selects the USB Audio input.
• AES : Selects the AES/EBU input via balanced digital XLR
• COAX : Selects SPDIF input via digital COAX/RCA
• TOS : Toggles between the two TOSLINK SPDIF inputs,
TOS1 and TOS2.
• PDAI : Selects PDAI SPDIF digital input via COAX/RCA
Toggles the analog output polarity. Polarity inversion is performed
in the digital domain.
Mutes the DA2 V2 outputs.
Toggles through all the DA2 V2 digital inputs.
Use the transport functions shown to control an associated EMM
Labs transport when used with the DA2 V2 (Red buttons).
Use the VOL+, VOL- and MUTE buttons shown to control an
associated EMM Labs preamp when used with the DA2 V2.
DAC:
INPUT:
POLARITY:
MUTE:
INPUT:
TRANSPORT:
PREAMP:
Infrared Remote Control
The remote control provides combined functions for both the DA2 V2
(Green), associated transport (Red) and some preamp functions
(Orange). The functions that are relevant to the DA2 V2:
© 2015-2020 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DA2 V2 AUDIO CONVERTER OWNER’S MANUAL
TRANSPORT
POLARITY
MUTE
VOLUME
DAC
