background image

006

DAC2X AUDIO CONVERTER

DA2 AUDIO CONVERTER

The DA2 is the first 16xDSD/DSD1024 stereo D/A converter with a 

wide variety of user selectable digital inputs. It has evolved from EMM 

Labs acclaimed converter systems which are used worldwide in 

professional studios to create some of the finest recordings.

The DA2 provides conversion from a wide variety of digital input 

formats, including USB Audio for computers, media systems and 

digital audio playback machines making it an extremely flexible 

converter system that can act as a standalone conversion hub to a host 

of digital sources.

The DA2 has: 

  •  Ed Meitner’s proprietary discrete Dual Differential

    16xDSD/DSD1024 DACs.

  •  The enhanced MDAT2 DSP upsamples and conditions digital

    audio to sixteen times the SACD/DSD (45/49Mhz) samplerate. 

  •  Proprietary MFAST technology for getting rid of source jitter.

  •  Proprietary Masterclock for sub-pico second jitter performance. 

  •  Uses our exclusive aerospace grade composite laminate pcbs.

  •  Supports up to 24bit, 192kHz on all PCM inputs including USB

  •  Supports DSD and 2xDSD streaming over USB

  •  Supports 352 and 384DXD  streaming over USB

  •  Supports DSD for CD/SACD playback over EMM Optilink

The DA2, when paired with an EMM Labs transport, performs as an 

unparalleled CD/SACD playback system.

© 2015-2016 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.

DA2 AUDIO CONVERTER OWNER’S MANUAL

Summary of Contents for DA2




















Reviews: