012
Operation
© 2010 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.
DAC2 AUDIO CONVERTER OWNER’S MANUAL
Basic Operations and Input Connections
1.
Memory:
After 10 seconds when no button has been pushed or changed, the DAC2 memorizes
its momentary setup in permanent memory for later retrieval after the next powerup.
It will be recalled immediately after the unit is turned on. Each individual input
selection will keep its last configuration before powerdown.
During normal operation each input selection will immediately memorize its
configuration so that switching between different sources with different configurations
can be accomplished with a single button selection.
2.
DAC2 Input Connections
Just connect the appropriate digital source output to the specific DAC2 input, on the
back of the DAC2 and select the appropriate digital source from either the front panel
buttons or the remote control.
Typical front panel display when DAC2 is locked to 44.1kHz base frequency and the
