background image

Warranty

Warranty

EMM Labs warrants the DAC2 product against defects in material 

and workmanship under normal use and service for a period of time 

specified by the product’s serial number from the date of first 

delivery to the owner. The warranty time period is 5 years. Warranty 

is limited to the original owner and is non-transferable. 

EMM Labs will pay for return shipping charges back to the owner 

when the product is sent to EMM Labs within the first 90 days after 

purchase (US and Canada end-users only). Otherwise, owner will be 

responsible for all shipping charges to and from EMM Labs.

For all warranty claims, a copy of the original invoice must 

accompany the product.

Opening the product or modifying it in any way by the owner, 

including but not limited to cryogenic treatment, will void any 

warranty.

Please contact EMM Labs 

(support@emmlabs.com)

 for RMA number 

and shipping instructions before shipping any product to EMM Labs.

EMM Labs products are sold worldwide through authorized dealers 

with restricted territories. EMM Labs product purchased from 

non-authorized dealers or from a dealer selling outside his / her 

authorized territory will automatically void product warranty.

© 2010 EMM Labs Inc., All Rights Reserved. EMM Labs reserves the right to amend specifications & design without notice.

DAC2 AUDIO CONVERTER OWNER’S MANUAL

004

Summary of Contents for DAC2



















Reviews: