4
Up to 3 AES/EBU cables can be connected to the DAC6e. The 4 possible
audio frequencies can be selected according to Table 1:
In the case of 2FS operation (88.2kHz or 96kHz) the clock rate of the trans-
mission on the cable is double. Master / Slave clock operations can be
selected with the INT / EXT switch (see below for more detail). In Slave
operation there has to be at least an AES/EBU cable connected to channels
1/2 as this connection provides the clock for the DAC6e.
Conversion from DSD on Optical to Analog
The optical interface format requires 2 cables: 1 for clock and 1 for audio
data. They both need to be connected regardless of what clock mode is
selected (master or slave). This mode requires the selection of 44.1kHz
base frequency. Master / Slave clock operations can be selected with the
INT / EXT switch (see below for more detail) and the 1FS / 2FS switch is
ignored.
Table 1: Selection of Audio Sample Rates
Sample Rate
Switch
Switch
44.1kHz
1FS
44.1kHz
48kHz
1FS
48kHz
88.2kHz
2FS
44.1kHz
96kHz
2FS
48kHz
48
INT
EXT
DSD
PCM
NORM
INV
FORMAT PHASE
1FS
2FS
LOCK
POWER
ERROR
44.1
SAMPLE CLOCK
Summary of Contents for DAC6e
Page 1: ...DAC6e USER MANUAL V1 0...
