3
GB | LED wall light
LED luminaire is designed for indoor use to be mounted on a solid base.
Ingress Protection IP54 – suited for both indoor and outdoor use.
Mounting
Mount the lamp firmly onto a solid basis, for example a wall, a ceiling and like that.
Connect the power cord to the mains 230 V~.
Connecting conductor must not be connected to the mains at time of installation. This operation can be carried out only by an
authorized person.
L – brown – live wire
N – blue – neutral wire
PIR sensor – specification:
Time-delay: min. 10 s ±5 s – max. 5 min ±1 min
Detection angle: 120°
Ambient light: 10 lux –> 2 000 lux (adjustable)
Detection distance: 1–10 m
Detection motion speed: 0.6–1.5 m/s
PIR sensor setting:
Detection field is possible to be set by moving the motion sensor switch to the left and to the right.
Adjustment of the ambient light (sensitivity)
You can choose at what luminosity will the sensor go on by a button A (see picture no. 5).
Time-delay
You can set the time-delay of the lamp by a button B (see picture no. 5)
WARNING
• Luminaire is suitable entirely for fixed mounting.
• The luminaire can be connected only to the electric distribution network, whose installation and protection complies with
the applicable standards.
• Before any manipulation or servicing of the luminaire disconnect the luminaire from AC power. This operation can be carried
out only by an authorized person.
• In case of any damage to any part of the luminaire, don’t use it.
• LED chips inside the luminaire are not replaceable.
• Don’t change inner wiring of the luminaire.
• In case of broken cover don’t use the luminaire and replace broken cover with new one immediately.
Emos spol s.r.o. declares that the LED wall light is in compliance with the essential requirements and other relevant provisions of
Directive. The device can be freely operated in the EU. The Declaration of Conformity can be found at http://www.emos.eu/download.
CZ | LED nástěnné svítidlo
LED svítidlo je určeno k montáži na pevný podklad do vnitřních prostor.
Krytí: IP54 – vhodné jak pro vnitřní, tak i venkovní použití.
Montáž
Svítidlo pevně připevněte na pevný podklad, např. na zeď, strop apod.
Připojte napájecí kabel pro připojení k napájecí síti 230 V~.
Připojovaný vodič nesmí být v době montáže svítidla připojen na napájecí síť. Připojení napájecího kabelu ke svítidlu může
provádět pouze pracovník s kvalifikací dle vyhlášky č. 50/1978 Sb., v platném znění, minimálně pracovník znalý dle § 5 vyhlášky
č. 50/1978 Sb., v platném znění.
L – hnědá – pracovní vodič (live)
N – modrá – střední vodič (neutral)
