3
Detection range:
When wall-mounted:
- recommended mounting height: 1–1.8 m
When ceiling-mounted:
- recommended mounting height: 2.5–6 m
The sensor range can be reduced in four stages:
NOTE:
The above detection range is for a person who is
1.6–1.7 m tall and is moving at a speed of 1–1.5 m/s. If the
height, figure or speed of the detected person differs, the
detection range changes as well.
Trigger Time
The light remains on for a set period since the last movement
was detected.
Any movement detected before the set time elapses restarts
the timer. Before setting the detection range and testing
the sensor, it is recommended to set the lowest trigger time
possible.
NOTE
: Once the light turns off, it takes approximately one
second before the sensor is again able
to detect movement. The light will not turn on again until this
period of time passes.
Setting Sensitivity to Surrounding Lighting
The motion sensor can be adjusted so that it only triggers at
the set level of surrounding lighting, or lower.
Summary of Contents for ZM3412
Page 27: ...27 ...